three-round liquid filter cartridge housings, filter housings, filter cartridges, chemical filtration

This information was printed from the Purolator Facet, Inc. web site.
All material is copyrighted and may not be reproduced or reprinted without written permission.
www.purolator-facet.com | Tel: 336.668.4444 | E-mail: info@purolator-facet.com

P66 Three-Round Liquid Cartridge Housings

Flow Rates Up to 60 GPM

Purolator's Model 66 Liquid Cartridge housing gives the versatility of choosing
cartridges for the needed flow rates, chemical compatibility and particle retention. They are a good choice to use in applications where a low micron retention is required. Model P66 accommodates three elements in either 20, 30, or 40 inch lengths.

FEATURES

Carbon or stainless steel construction

Plated quick swing closure with eye nuts

Buna lid seal

316 SS cup & spring assemblies

150 PSI pressure rating

Differential, drain, and vent ports

316 SS center guide post

Epoxy paint - inside and out - on carbon steel

Adjustable support legs

OPTIONS

Duplexing for continual flow during maintenance
Higher pressure rating
ASME code U or UM
Adjustable support legs
Specify element type

DOE (Double Open Ended) cartridges
222 style O-ring with closed top cap
226 style with closed top cap
1" NPT cartridges

NOTE: Element is not included in the filter,
but the type of element must be specified at
time of housing order.

Click here to download Purolator Facet's two-page brochure (123kb) that contains complete technical information about the P66 liquid cartridge housings.

Go to the top of this page